Parts & Accessories

Carry your gear behind you tucked out of the wind with XLAB's Super Wing Dual Rear Carrier. This versatile aero add-on delivers options galore. You can easily attach what you need for any length ride. A small seat bag fits inside the carrier, bottle cages attach on the outside and tubes can go underneath (accessories sold separately). The possibilities are endless. You also have 12 different mounting options so you can place your bottles where you want them. Also, the Super Wing is made of light, tough aluminum so there's no twisting under load, no swaying while riding and no bouncing or lost bottles over bumps.

Highly adjustable stainless-steel carrier with three ways to dial in your fit. Includes our impressive gripping GORILLA cage. Designed to accommodate saddles with transition hooks. The DELTA series of saddle mounted carriers have the largest degree of adjustability of any rear carrier, allowing you to place your bottle in the aerodynamic “sweet-spot” directly behind the rider, minimizing drag and maximizing time gains, typically between 120 and 165 seconds over the course of a full distance triathlon.

Enjoy our campout convenient high flow spigot for filling vessels, washing hands or cooking. Hypalon-reinforced hanging points let you hang from a tree or other surface for performance no matter where you are. Compatible with CamelBak filtered by LifeStraw reservoir filter kit for clean drinking water on the go. Even better, the reservoir filter kit has easy collapsibility for simple storage when the party's home for the week.  Repurpose Green Sustainability Badge: Made with safer chemicals.

XLAB's Turbo Wing Rear Carrier delivers options galore so you can easily attach bottles, a bag, CO2 cartridges, and everything else you need for any length ride, and keep it all neatly tucked behind you, out of the wind. There are also 15 different mounting options and you can keep it upright for low drag or invert it for easy access. Plus, it's made of light, strong aluminum, which means there's no twisting under load, no swaying while riding and no bouncing or lost bottles over bumps.

Our new Fusion 6L Group Hydration Reservoir is perfect for adventures with friends and family. Enjoy our campout convenient high flow spigot for filling vessels, washing hands or cooking. It's enhanced by Hypalon-reinforced hanging points let you hang from a tree or other surface for performance no matter where you are. Compatible with CamelBak filtered by LifeStraw reservoir filter kit for clean drinking water on the go. Pair with our ChillBak Pack 30 Cooler for portable party people to keep beverages cool. Dig dynamic design compatibility with our CamelBak reservoir filter kit and easy collapsibility for simple storage when the party's home for the week.  Made with safer chemicals, earning the Repurpose Green Sustainability Badge. 

A dynamic, integrated hydration solution created for hardcore runners, hikers and cyclist, the Fusion 3L Reservoir with Tru Zip Waterproof Zipper is ready for the long haul. Enjoy convenient compatibility thanks to a universal hanger that will fit any hydration-compatible packs. Our Quicklink System ensures easy on-the-go reservoir removal from the pack. Keep it clean with Hydroguard technology to limit bacteria in the reservoir and tube. Even better, the rigid backplate eliminates need for baffle for easier cleaning and drying. Repurpose Green Sustainability Badge: Made with safer chemicals.

Hydration for running, hiking and biking, wherever you may roam. We create ever-evolving hydration systems that keep up with our always-exploring adventurers. The Fusion 2L Reservoir with Tru Zip Waterproof Zipper offers revolutionary design that's easy to use.  We bring heavyweight features in an ultralight package equipped with a universal hanger for all hydration-compatible packs. Molded backplate creates a thin profile with no need for baffles so cleaning is that much easier. Made with safer chemicals, earning the Repurpose Green Sustainability Badge. At journey's end, everyone will enjoy easier cleaning thanks to Hydroguard technology which inhibits the growth of bacteria in the reservoir and tube.

New Torpedo Bottle and essentials to reload your Torpedo System, or upgrade to the new Anti-Leak Design. Includes: Super-Sealed TORPEDO Bottle, Straw, Drink Valve, Solid and Split Lids, Leak-Free Breather Valve, Dolphin Tail Straw Retainer and Hardware.

Aluminum BTA hydration mount compatible with Torpedo Versa (sold separately). Pre-drilled front mounting holes for Torpedo Versa or aero computer mounts. - Adjustment Width: 75-150mm - Construction (Plate): 6061-T6 Aluminum - Construction (Brackets): Nylon composite with Velcro straps coated with no-slip extension grip - Weight: 1.9oz (55g)

Give your pack a lower center of gravity with the brand new Crux LR reservoir. It delivers 20% more water per sip while keeping weight positioned low on your back, which translates to better stability in the saddle and on the trail. The Crux delivers 20% more water with every sip, plus an on/off lever that seals your tube shut when you’re not drinking. CamelBak also upgraded the fill-port design to include an ergonomic handle and a redesigned a cap that’s more intuitive and easier to fill—small changes that make it that much easier to fill up and hit the road.

The BO-6 is a premium bottle opener modeled after our iconic PW-4 pedal wrench, with two offset wrench openings for optimal mechanical advantage and a long vinyl-dipped handle for maximum leverage. Made in the USA from laser-cut 304 stainless steel for a lifetime of use.

B-RAD Everywhere Base 3

The Wolf Tooth Bottle Shift is designed to offset a bottle to a more optimal location and make it possible to also mount a pump on frames with large downtubes. It is most commonly used on dual suspension frames where the water bottle is difficult to access because of interference with the top tube or shock. By shifting the bottle slightly off center and tilting it outward, clearance is greatly improved. - Slots and extra tapped holes in the mount provide 18mm of bottle position adjustment - Designed to be easily flipped to provide either left or right hand bottle access - Centerline of the bottle moves 18mm with the combined 10 degree tilt and 9 mm offset - Offset of pump bracket mounting holes allows mounting mini pumps on most mountain bikes

This water bottle enclosure is designed to insulate and prevent water from freezing when riding in cold conditions. - Waterproof, 5.5mm neoprene construction with nylon lamination inside and outside - Includes: plastic cage, Allen key, screws and washers - Fits and encloses up to an average 20oz bottle and has enough room for a heat pack - Extended zipper pull for easy open close while riding with winter gloves - Reflective material on logo

B-RAD Everywhere Base 2

Solid aluminum dropper post mount to attach rear bikepacking bag, larger saddle bag, bottle cage, tail light, and more.

Increase your hydration capacity with Origin-8's HydroRail Double Seat Bracket. This bracket mounts to your saddle rails and holds two bottle cages. And, the angle is fully adjstable so you can customize it to keep your bottles within easy reach. Bottles and cages sold separately.

Thanks to the modular TWIST system an exchange of the single parts is done in no time. If base and replacement bottle are still at hand, the TWIST bottle connector is also available separately. The bottle connector is suitable for all TWIST bottles with a belt as well as TWIST bases. Fitting the new connector is simple: insert the connector into the recess of the TWIST replacement bottle and lock with a coin. - Suitable for all TWIST bottles with a belt - Fits all TWIST bases

Keep your handlebar organized and your devices secure with the SGS-400-STD (22.2/25.4/28.6mm) from Minoura. - Holds up to 2 accessories (light, computer, mp3, bottle cage holder, etc.) - Lightweight and rustproof alloy construction - New LW-Clamp reduces weight 25 grams compared to previous models - Aluminum bar is position adjustable and uses Hex Bolt to install and remove - 22mm-29mm diameter

- Handlebar cage mounting bracket allows any bottle cage to be firmly attached to handlebars - Compatible with handlebars from 22mm to 36mm

The all-in-one tool kit for faster cleaning and drying of your CamelBak Crux reservoir.

BiKASE's Handlebar/Seat Post Bottle Cage Bracket makes it easy to attach a bottle cage and bottle (both sold separately) to your handlebars or seat post. It's made of durable engineered plastic polymers and includes shims and hardware to fit on handlebars and seat posts with 24 to 32mm diameters or 32mm to 43mm diameters. It also rotates so you can set the bottle where you want it for easy access. • Material: POM head, PP bracket, Stainless steel hardware • Size: 8cm x 6cm x 2cm • Weight: 40 g • Fits handlebar 24mm-32mm • Versatile bracket rotates

Durable, fiber reinforced Composite Matrix construction. Optimized side-load shape for easy bottle access in compact frames (right side configuration only). Integrated storage container below the cage with CO2 cartridge holders on both sides of the cage. Engineered to hold bottles securely. Oval mounting holes allow fine tuning of position on frame. - Weight: 94g

Keep your handlebar organized and your devices secure with the SGS-400-OS (27.2/31.8/35.0mm) from Minoura. - Holds up to 2 accessories (light, computer, mp3, bottle cage holder, etc.) - Lightweight and rustproof alloy construction - New LW-Clamp reduces weight 25 grams compared to previous models - Aluminum bar is position adjustable and uses Hex Bolt to install and remove - 27mm-35mm diameter

Mount any water bottle cage using our Cage Strap Adapter to any diameter of 3.25" or less. This will allow you to mount a water bottle in all kinds of different areas on your bike—you choose what is best for you! The extra-wide length can be cut to your desired length. The Adapter won't move around because it has a rubber base and compresses on your frame when mounted.

- Insulated koozie designed for 12 oz cans - Made for Origin8 by Bomber Jacket - Made of Premium 4mm neoprene - HD dye-sublimation print for long-lasting graphics - Reduces rate of warming by 50% - Collapsible design - Gold Alloy Zippers - Color: Speed

Versatile mount for additional water bottle cage or other accessories. Band style clamp provides easy installation and flexible mounting options. - Fits tubes 20 - 60mm - Engineering grade polymer - Max load: 1.5 kg / 3.31 lb - 26 g / 0.92 oz (2 pcs)

Keep your reservoir free from taste and odor and ready for your next adventure. Fast-acting tablets are easy to use and work in just 5 minutes. - Periodic cleaning with CamelBak Cleaning Tabs keeps reservoir and tube free from taste and odor - CamelBak Cleaning Tabs work in just 5 minutes for a thorough cleaning - 8 Cleaning Tablets Per Pack.

Keep your tube close and hydration on-tap with the Magnetic Tube Trap.

Adapter for direct mounting of the Fuel Pack or other equipment with screw connections. Are you planning to mount the Fuel-Pack or a bottle holder on your bike but find the threaded holes are not in the right place? The Offset-Plate 64 MM gives you a flexible way of adjusting the position of the Fuel-Pack, a bottle holder or other equipment with screw connections.